| Sign In | Join Free | My burrillandco.com |
|
Dongnan Electronics Co.,ltd
Verified Supplier
1 Years
| Sign In | Join Free | My burrillandco.com |
|
1 Years
| Item | Value | |
| Environmenttemperature | -40～+85℃ | |
| Ratings | 0.1A/125VAC;3A12VDC;0.1A/250VAC0.1A48VDCμ1E5 | |
| Operating speed | 0.1mm～1m/s(no lever) | |
| Operating frequency | Mechanical 60 cycles/min;Electrical 25cycles/min | |
| Insulation resistance | ≥100MQ(500VDC) | |
| Contact resistance | Terminaltype≤50mΩ wire type≤100mΩ(22#,L≤200mm) | |
| Operating Force | 180:1.8N(IP67)130:1.3N(Ip40) | |
| Test voltage | Between non connected terminals | AC500V,50/60Hz,1min |
| Between each terminal and other exposed metalparts Between each terminaland ground | AC1000V,50/60Hz,1min | |
| Vibration resistance | 10～55Hz,1.5mm double amplitude | |
| Shock resistance | Endurance:1000m/s2(100G approx.100G)max Wrong action:300m/s2(30G approx.30G)max | |
| Electricshock proof protection grade | 1 class | |
| Cover protection degree | IECIP67(Besides terminal part of terminaltype) Or other grades | |
| Life | ≥100,000次Mechanical≥100,000 cycles ≥500,000次Electrical≥500,000 cycles | |
| Safety approvals | UL/CUL、TUV、CE、CQC | |
1 Circuit | Z:SPDT" T:SPST-NO D:SPST-NC | 7 Portection degree | No mark:IP67 (Exceptterminal part of terminal type) Ip40 | ||||||||||||||||
2 Actuator forms | 0:No lever; 3(Straight lever; 6:Arc lever; Not standard lever; (is a letter or a combination of letters and numbers) | ||||||||||||||||||
8 Additional specs code and wire color code ) | Indicate by numbers orletters ■ Indicates that there are special requirements,such as not standard terminals and specialoperation characteristic values,which are shows as two Arabic numerals. ■Non-default color for the wire configuration: shows asthree letters COM、NC、NO to indicatethe wire color configuration;if NO or NC, vacant place shows o. (see sheet 1 for color codes) Sheet 1
Example: BWR-black,white,and red;BOR-Black(No)Red RWO-Red and White(None) ■ The wire configuration is non default specifications (wirenumber,grade),and two Arabicnumerals are also used to indicate additional codes. Default wire specifications:UL100722# If there are append specs code and wire color code at the same time,then the wirecolor code should be after the append apecs code. Wire color ofwire type switch is as follows: Common terminal wireCOM:Black Normally closed terminal wire NC:Red Normallyopened terminal wire NO:White | ||||||||||||||||||
3 Terminal types | PA:LongPCBterminal PB:Width0.9 short PCB terminal PC:Width 0.6 short PCB terminal FA:Long solder terminal FB:Short solderterminal B:Bottom wire type L:Left side wire type (definitionof right and left is shown indiagram) R:Right sidewiretype Y:Not standard terminal | ||||||||||||||||||
4 (max) Operating force | 130:1.30N 180:1.80N Note:ifitis not standard operating force,indicate with the upperlimit | ||||||||||||||||||
5 Mounting construction | AL:Left dowel pin AR:Right dowel pin AA: each double sides dowel pin W:without hole and pin | ||||||||||||||||||
6 Wire length of wire type terminal | Wire length of wire type terminal(mm). Vacant for non-wire type |
Model | WS10-Z0-PA180W |
FP Max(mm) | 6.3 |
OP(mm) | 5.4±0.3 |
PT Max(mm) | 1.5 |
OT Min(mm) | 0.7 |
MD Max(mm) | 0.4 |
OF Max(N) | 1.8 |
RF Min(N) | 0.2 |
M o d e l | WS10-Z0-PA180AL |
FP Max(mm) | 10.3 |
OP(mm) | 9.4±0.3 |
PT Max(mm) | 1.5 |
OT Min(mm) | 0.7 |
MD Max(mm) | 0.4 |
OF Max(N) | 1.8 |
RF Min(N) | 0.2 |
Model | WS10-Z3-PA180AL |
FP Max(mm) | 15 |
OP(mm) | 10.7±1.5 |
PT Max(mm) | 5.5 |
OT Min(mm) | 0.7 |
MD Max(mm) | 1.1 |
OFMax(N) | 2.5 |
RF Min(N) | 0.5 |
Model | WS10-ZA-PA180AL |
FP Max(mm) | 12 |
OP(mm) | 10±1.2 |
PT Max(mm) | 2 |
OT Min(mm) | 0.7 |
MDMax(mm) | 1.1 |
OF Max(N) | 2.5 |
RF Min(N) | 0.5 |
Model | WS10-Z0-PA130AL-IP40 |
FP Max(mm) | 7.3 |
OP(mm) | 6.2±0.3 |
PT Max(mm) | 1.5 |
OT Min(mm) | 0.7 |
MD Max(mm) | 0.4 |
OF Max(N) | 1.3 |
RFMin(N) | 0.1 |
Model | WS10-Z0-PA130W-IP40 |
FP Max(mm) | 3.3 |
OP(mm) | 2.2±0.3 |
PT Max(mm) | 1.5 |
OT Min(mm) | 0.7 |
MD Max(mm) | 0.4 |
OFMax(N) | 1.3 |
RF Min(N) | 0.1 |
description2
description2
|